LIRC Level I Driver

Available for: Windows

Driver for Windows vscpl1_lircdrv.dll (vscpl1_lircdrv.lib)

Device driver for that connects to LIRC (Unix) or WINLIRC (Windows) and receive data from IR remotes and sends IR data out.

LIRC/WINLIRC must be functioning on the computer that use this driver. Follow the information on respective site on how to set them up.

Parameter String

"path to config file;lirchost;lircport"

path to config file

The full path to the location for the configuration XML-file.


Hostname for the host the LIRC daemon is running on. If not given "localhost" is assumed.


The port that the LIRC daemon is listening to. If not given the default-port "8765" i used.


Not used.

Status return

Not used. Platforms

Configuration file format

In the configuration file it is possible to set what VSCP (Level I or Level II) events or generic CAN messages that should be sent (none, one or many) for a specific key pressed on the remote.

The format for this file is XML and is defined as follows:

See source

Very Simple Control Protocol
Thu Jan 17 2019 17:41:36 GMT+0000 (UTC)
This document is licensed under Creative Commons BY 4.0 and can be freely copied, redistributed, remixed, transformed, built upon as long as you give credits to the author.

results matching ""

    No results matching ""