Setting up the system on Beaglebone
Beaglebone is a very nice board and VSCP & Friends is a perfect match for it if you are using distributions based on Debian wheezy or later.
VSCP & Friends has been tested and works very well on Beaglebone Black. The setup is the same as on other Unix systems so the instructions to setup VSCP & Friends on a Unix system can be used.
Related Links
- opkg package manager - https://wiki.openwrt.org/doc/techref/opkg
- Reflashing - http://circuitco.com/support/index.php?title=Updating_The_Software
- Setting up CAN - https://github.com/digitalbond/canbus-beaglebone
- Testing CAN - https://groups.google.com/forum/#!msg/beagleboard/MLJFSCh_J-w/fX1r6E_AvIoJ
- http://e2e.ti.com/support/arm/sitara_arm/f/791/t/154560.aspx?pi69795=2
- Touch screen - http://www.carcomputer.co.uk/index.php?/monitors/hdmi-monitors/lilliput-fa1011-np/c/t-10.1-hdmi-touch-screen-monitor
Fri Aug 17 2018 07:19:06 GMT+0000 (UTC)
This document is licensed under Creative Commons BY 4.0 and can be freely copied, redistributed, remixed, transformed, built upon as long as you give credits to the author.