Class=1 (0x01) - Alarm functionality

CLASS1.ALARM

Description

Alarm events that indicate that something not ordinary has occurred. Note that the priority bits can be used as a mean to level alarm for severity.

Type=0 (0x00) - General event

VSCP_TYPE_ALARM_GENERAL

General Event.

Type=1 (0x01) - Warning

VSCP_TYPE_ALARM_WARNING

Indicates a warning condition.

Data byte Description
0 0=off. 1=on.
1 Zone for which event applies to (0-255). 255 is all zones.
2 Sub-zone for which event applies to (0-255). 255 is all sub-zones.

If both or one of zone/sub-zone are omitted they should be interpreted as if they where 255.


Type=2 (0x02) - Alarm occurred

VSCP_TYPE_ALARM_ALARM

Indicates an alarm condition.

Data byte Description
0 0=off. 1=on.
1 Zone for which event applies to (0-255). 255 is all zones.
2 Sub-zone for which event applies to (0-255). 255 is all sub-zones.

If both or one of zone/sub-zone are omitted they should be interpreted as if they where 255.


Type=3 (0x03) - Alarm sound on/off

VSCP_TYPE_ALARM_SOUND

Alarm sound should be turned on or off.

Data byte Description
0 0=off. 1=on.
1 Zone for which event applies to (0-255). 255 is all zones.
2 Sub-zone for which event applies to (0-255). 255 is all sub-zones.

If both or one of zone/sub-zone are omitted they should be interpreted as if they where 255.


Type=4 (0x04) - Alarm light on/off

VSCP_TYPE_ALARM_LIGHT

Alarm light should be turned on or off.

Data byte Description
0 0=off. 1=on.
1 Zone for which event applies to (0-255). 255 is all zones.
2 Sub-zone for which event applies to (0-255). 255 is all sub-zones.

If both or one of zone/sub-zone are omitted they should be interpreted as if they where 255.


Type=5 (0x05) - Power on/off

VSCP_TYPE_ALARM_POWER

Power has been lost or is available again.

Data byte Description
0 0=off. 1=on.
1 Zone for which event applies to (0-255). 255 is all zones.
2 Sub-zone for which event applies to (0-255). 255 is all sub-zones.

If both or one of zone/sub-zone are omitted they should be interpreted as if they where 255.


Type=6 (0x06) - Emergency Stop

VSCP_TYPE_ALARM_EMERGENCY_STOP

Emergency stop has been hit/activated. All systems on the zone/sub-zone should go to their inactive/safe state.

Data byte Description
0 0=off. 1=on.
1 Zone for which event applies to (0-255). 255 is all zones.
2 Sub-zone for which event applies to (0-255). 255 is all sub-zones.

If both or one of zone/sub-zone are omitted they should be interpreted as if they where 255.


Type=7 (0x07) - Emergency Pause

VSCP_TYPE_ALARM_EMERGENCY_PAUSE

Emergency pause has been hit/activated. All systems on the zone/sub-zone should go to their inactive/safe state but preserve there settings.

Data byte Description
0 0=off. 1=on.
1 Zone for which event applies to (0-255). 255 is all zones.
2 Sub-zone for which event applies to (0-255). 255 is all subzones.

If both or one of zone/sub-zone are omitted they should be interpreted as if they where 255.


Type=8 (0x08) - Emergency Reset

VSCP_TYPE_ALARM_EMERGENCY_RESET

Issued after an emergency stop or pause in order for nodes to reset and start operating .

Data byte Description
0 0=off. 1=on.
1 Zone for which event applies to (0-255). 255 is all zones.
2 Sub-zone for which event applies to (0-255). 255 is all sub-zones.

If both or one of zone/sub-zone are omitted they should be interpreted as if they where 255.


Type=9 (0x09) - Emergency Resume

VSCP_TYPE_ALARM_EMERGENCY_RESUME

Issued after an emergency pause in order for nodes to start operating from where they left of without resetting their registers .

Data byte Description
0 0=off. 1=on.
1 Zone for which event applies to (0-255). 255 is all zones.
2 Sub-zone for which event applies to (0-255). 255 is all sub-zones.

If both or one of zone/sub-zone are omitted they should be interpreted as if they where 255.


Type=10 (0x0A) - Arm

VSCP_TYPE_ALARM_ARM

Issued after an alarm system has been armed.

Data byte Description
0 0=off. 1=on.
1 Zone for which event applies to (0-255). 255 is all zones.
2 Sub-zone for which event applies to (0-255). 255 is all sub-zones.

If both or one of zone/sub-zone are omitted they should be interpreted as if they where 255.


Type=11 (0x0B) - Disarm

VSCP_TYPE_ALARM_DISARM

Issued after an alarm system has been disarmed.

Data byte Description
0 0=off. 1=on.
1 Zone for which event applies to (0-255). 255 is all zones.
2 Sub-zone for which event applies to (0-255). 255 is all sub-zones.

If both or one of zone/sub-zone are omitted they should be interpreted as if they where 255.


Type=12 (0x0C) - Watchdog

VSCP_TYPE_ALARM_WATCHDOG

Issued when a watchdog has been triggered.

Data byte Description
0 index.
1 Zone for which event applies to (0-255). 255 is all zones.
2 Sub-zone for which event applies to (0-255). 255 is all sub-zones.

If both or one of zone/sub-zone are omitted they should be interpreted as if they where 255.



Very Simple Control Protocol
Wed Nov 28 2018 07:10:31 GMT+0000 (UTC)
This document is licensed under Creative Commons BY 4.0 and can be freely copied, redistributed, remixed, transformed, built upon as long as you give credits to the author.

results matching ""

    No results matching ""