Class=15 (0x0F) - Data

CLASS1.DATA

Description

Representation for different general data types. Byte 0 is the data coding byte described here. Unit may not have meaning for some of the types and should be set to zero in that case.

Type=0 (0x00) - General event

VSCP_TYPE_DATA_GENERAL

General event.

Type=1 (0x01) - I/O value

VSCP_TYPE_DATA_IO

General I/O value. First data byte defines format.

Data byte Description
0 Data coding.
1-7 Data with format defined by byte 0.

Type=2 (0x02) - A/D value

VSCP_TYPE_DATA_AD

General A/D value. First data byte defines format.

Data byte Description
0 Data coding.
1-7 Data with format defined by byte 0.

Type=3 (0x03) - D/A value

VSCP_TYPE_DATA_DA

General D/A value. First data byte defines format.

Data byte Description
0 Data coding.
1-7 Data with format defined by byte 0.

Type=4 (0x04) - Relative strength

VSCP_TYPE_DATA_RELATIVE_STRENGTH

Relative strength.

Data byte Description
0 Data coding.
1-7 Data with format defined by byte 0.

Coding of units (Level I)

Code Description
0 Byte count = 2: Min = 0, Max = 255
Byte count = 3: Min = 0, Max = 65535
and so on...
1 db (decibel)
2 dbV (decibel volts)
3 Undefined

Units for Level II are the same as for Level I for the first four units.


Type=5 (0x05) - Signal Level

VSCP_TYPE_DATA_SIGNAL_LEVEL

Signal Level is a relative strength value that (as default) has its maximum at 100 and minimum at 0 interpreted as a percentage. For a digital transmission Signal Level it can be used to give an indication of the analogue signal and CLASS1.DATA, Type = 6, Signal Quality can be used to give an indication of the quality of the digital part as BER (Bit Error Ratio) for example.

Data byte Description
0 Data coding.
1-7 Data with format defined by byte 0.

Coding of units (Level I)

Code Description
0 (0-100) percentage.
1 Byte count = 2: Min = 0, Max = 255
Byte count = 3: Min = 0, Max = 65535
and so on...

Units for Level II are the same as for Level I for the first four units.


Type=6 (0x06) - Signal Quality

VSCP_TYPE_DATA_SIGNAL_QUALITY

Signal Quality be used to give an indication of the quality of the digital part as BER (Bit Error Ratio) for example.

Data byte Description
0 Data coding.
1-7 Data with format defined by byte 0.

Coding of units (Level I)

Code Description
0 0-100, Percent
1 Byte count = 2: Min = 0, Max = 255 Byte count = 3: Min = 0, Max = 65535 and so on...
2 tbd

Units for Level II are the same as for Level I for the first four units.


Type=7 (0x07) - Count value

VSCP_TYPE_DATA_COUNT

General counter value. First data byte defines format.

Data byte Description
0 Data coding.
1-7 Data with format defined by byte 0.


Very Simple Control Protocol
Thu Aug 16 2018 09:30:01 GMT+0000 (UTC)
This document is licensed under Creative Commons BY 4.0 and can be freely copied, redistributed, remixed, transformed, built upon as long as you give credits to the author.

results matching ""

    No results matching ""