Class=508 (0x01FC) - Error

CLASS1.ERROR

Description

Error reporting functionality that follow the errors defined in the vscp.h header file.

Type=0 (0x00) - Success 

VSCP_TYPE_ERROR_SUCCESS

This error message is used to report success, that is no error.

Data byte Description
0 index. Often used as an index for channels/sub devices within a module.
1 Zone for which event applies to (0-255). 255 is all zones.
2 Sub-zone for which event applies to (0-255). 255 is all sub-zones.
3-7 Can be present or not be present. If present the bytes give additional user specific information.

Type=1 (0x01) - Error 

VSCP_TYPE_ERROR_ERROR

This error message is used to indicate an error condition.

Data byte Description
0 index. Often used as an index for channels/sub devices within a module.
1 Zone for which event applies to (0-255). 255 is all zones.
2 Sub-zone for which event applies to (0-255). 255 is all sub-zones.
3-7 Can be present or not be present. If present the bytes give additional user specific information.

Type=7 (0x07) - Channel error 

VSCP_TYPE_ERROR_CHANNEL

This error message is used to indicate a (communication) channel problem.

Data byte Description
0 index. Often used as an index for channels/sub devices within a module.
1 Zone for which event applies to (0-255). 255 is all zones.
2 Sub-zone for which event applies to (0-255). 255 is all sub-zones.
3-7 Can be present or not be present. If present the bytes give additional user specific information.

Type=8 (0x08) - Fifo empty error 

VSCP_TYPE_ERROR_FIFO_EMPTY

This error message is used to indicate a fifo empty problem.

Data byte Description
0 index. Often used as an index for channels/sub devices within a module.
1 Zone for which event applies to (0-255). 255 is all zones.
2 Sub-zone for which event applies to (0-255). 255 is all sub-zones.
3-7 Can be present or not be present. If present the bytes give additional user specific information.

Type=9 (0x09) - Fifo full error 

VSCP_TYPE_ERROR_FIFO_FULL

This error message is used to indicate a fifo full problem.

Data byte Description
0 index. Often used as an index for channels/sub devices within a module.
1 Zone for which event applies to (0-255). 255 is all zones.
2 Sub-zone for which event applies to (0-255). 255 is all sub-zones.
3-7 Can be present or not be present. If present the bytes give additional user specific information.

Type=10 (0x0A) - Fifo size error 

VSCP_TYPE_ERROR_FIFO_SIZE

This error message is used to indicate a fifo size problem.

Data byte Description
0 index. Often used as an index for channels/sub devices within a module.
1 Zone for which event applies to (0-255). 255 is all zones.
2 Sub-zone for which event applies to (0-255). 255 is all sub-zones.
3-7 Can be present or not be present. If present the bytes give additional user specific information.

Type=11 (0x0B) - Fifo wait error 

VSCP_TYPE_ERROR_FIFO_WAIT

This error message is used to indicate a fifo wait problem.

Data byte Description
0 index. Often used as an index for channels/sub devices within a module.
1 Zone for which event applies to (0-255). 255 is all zones.
2 Sub-zone for which event applies to (0-255). 255 is all sub-zones.
3-7 Can be present or not be present. If present the bytes give additional user specific information.

Type=12 (0x0C) - Generic error 

VSCP_TYPE_ERROR_GENERIC

This error message is used to indicate a generic error.

Data byte Description
0 index. Often used as an index for channels/sub devices within a module.
1 Zone for which event applies to (0-255). 255 is all zones.
2 Sub-zone for which event applies to (0-255). 255 is all sub-zones.
3-7 Can be present or not be present. If present the bytes give additional user specific information.

Type=13 (0x0D) - Hardware error 

VSCP_TYPE_ERROR_HARDWARE

This error message is used to indicate a hardware error.

Data byte Description
0 index. Often used as an index for channels/sub devices within a module.
1 Zone for which event applies to (0-255). 255 is all zones.
2 Sub-zone for which event applies to (0-255). 255 is all sub-zones.
3-7 Can be present or not be present. If present the bytes give additional user specific information.

Type=14 (0x0E) - initialization error 

VSCP_TYPE_ERROR_INIT_FAIL

This error message is used to indicate a initialization error.

Data byte Description
0 index. Often used as an index for channels/sub devices within a module.
1 Zone for which event applies to (0-255). 255 is all zones.
2 Sub-zone for which event applies to (0-255). 255 is all sub-zones.
3-7 Can be present or not be present. If present the bytes give additional user specific information.

Type=15 (0x0F) - Missing initialization error 

VSCP_TYPE_ERROR_INIT_MISSING

This error message is used to indicate a missing initialization error.

Data byte Description
0 index. Often used as an index for channels/sub devices within a module.
1 Zone for which event applies to (0-255). 255 is all zones.
2 Sub-zone for which event applies to (0-255). 255 is all sub-zones.
3-7 Can be present or not be present. If present the bytes give additional user specific information.

Type=16 (0x10) - Initialization ready 

VSCP_TYPE_ERROR_INIT_READY

This error message is used to indicate a initialization ready error.

Data byte Description
0 index. Often used as an index for channels/sub devices within a module.
1 Zone for which event applies to (0-255). 255 is all zones.
2 Sub-zone for which event applies to (0-255). 255 is all sub-zones.
3-7 Can be present or not be present. If present the bytes give additional user specific information.

Type=17 (0x11) - Not supported 

VSCP_TYPE_ERROR_NOT_SUPPORTED

This error message is used to indicate a not supported error.

Data byte Description
0 index. Often used as an index for channels/sub devices within a module.
1 Zone for which event applies to (0-255). 255 is all zones.
2 Sub-zone for which event applies to (0-255). 255 is all sub-zones.
3-7 Can be present or not be present. If present the bytes give additional user specific information.

Type=18 (0x12) - Overrun error 

VSCP_TYPE_ERROR_OVERRUN

This error message is used to indicate an overrun error.

Data byte Description
0 index. Often used as an index for channels/sub devices within a module.
1 Zone for which event applies to (0-255). 255 is all zones.
2 Sub-zone for which event applies to (0-255). 255 is all sub-zones.
3-7 Can be present or not be present. If present the bytes give additional user specific information.

Type=19 (0x13) - Receiver empty error 

VSCP_TYPE_ERROR_RCV_EMPTY

This error message is used to indicate a receiver empty error.

Data byte Description
0 index. Often used as an index for channels/sub devices within a module.
1 Zone for which event applies to (0-255). 255 is all zones.
2 Sub-zone for which event applies to (0-255). 255 is all sub-zones.
3-7 Can be present or not be present. If present the bytes give additional user specific information.

Type=20 (0x14) - Register error 

VSCP_TYPE_ERROR_REGISTER

This error message is used to indicate a register error.

Data byte Description
0 index. Often used as an index for channels/sub devices within a module.
1 Zone for which event applies to (0-255). 255 is all zones.
2 Sub-zone for which event applies to (0-255). 255 is all sub-zones.
3-7 Can be present or not be present. If present the bytes give additional user specific information.

Type=21 (0x15) - Transmitter full error 

VSCP_TYPE_ERROR_TRM_FULL

This error message is used to indicate a transmitter full error.

Data byte Description
0 index. Often used as an index for channels/sub devices within a module.
1 Zone for which event applies to (0-255). 255 is all zones.
2 Sub-zone for which event applies to (0-255). 255 is all sub-zones.
3-7 Can be present or not be present. If present the bytes give additional user specific information.

Type=28 (0x1C) - Library error 

VSCP_TYPE_ERROR_LIBRARY

This error message is used to indicate a library error.

Data byte Description
0 index. Often used as an index for channels/sub devices within a module.
1 Zone for which event applies to (0-255). 255 is all zones.
2 Sub-zone for which event applies to (0-255). 255 is all sub-zones.
3-7 Can be present or not be present. If present the bytes give additional user specific information.

Type=29 (0x1D) - Procedural address error 

VSCP_TYPE_ERROR_PROCADDRESS

This error message is used to indicate a procedural address error.

Data byte Description
0 index. Often used as an index for channels/sub devices within a module.
1 Zone for which event applies to (0-255). 255 is all zones.
2 Sub-zone for which event applies to (0-255). 255 is all sub-zones.
3-7 Can be present or not be present. If present the bytes give additional user specific information.

Type=30 (0x1E) - Only one instance error 

VSCP_TYPE_ERROR_ONLY_ONE_INSTANCE

This error message is used to indicate an only one instance error.

Data byte Description
0 index. Often used as an index for channels/sub devices within a module.
1 Zone for which event applies to (0-255). 255 is all zones.
2 Sub-zone for which event applies to (0-255). 255 is all sub-zones.
3-7 Can be present or not be present. If present the bytes give additional user specific information.

Type=31 (0x1F) - Sub driver error 

VSCP_TYPE_ERROR_SUB_DRIVER

This error message is used to indicate a sub driver error.

Data byte Description
0 index. Often used as an index for channels/sub devices within a module.
1 Zone for which event applies to (0-255). 255 is all zones.
2 Sub-zone for which event applies to (0-255). 255 is all sub-zones.
3-7 Can be present or not be present. If present the bytes give additional user specific information.

Type=32 (0x20) - Timeout error 

VSCP_TYPE_ERROR_TIMEOUT

This error message is used to indicate a timeout error.

Data byte Description
0 index. Often used as an index for channels/sub devices within a module.
1 Zone for which event applies to (0-255). 255 is all zones.
2 Sub-zone for which event applies to (0-255). 255 is all sub-zones.
3-7 Can be present or not be present. If present the bytes give additional user specific information.

Type=33 (0x21) - Not open error 

VSCP_TYPE_ERROR_NOT_OPEN

This error message is used to indicate a not open error.

Data byte Description
0 index. Often used as an index for channels/sub devices within a module.
1 Zone for which event applies to (0-255). 255 is all zones.
2 Sub-zone for which event applies to (0-255). 255 is all sub-zones.
3-7 Can be present or not be present. If present the bytes give additional user specific information.

Type=34 (0x22) - Parameter error 

VSCP_TYPE_ERROR_PARAMETER

This error message is used to indicate a parameter error.

Data byte Description
0 index. Often used as an index for channels/sub devices within a module.
1 Zone for which event applies to (0-255). 255 is all zones.
2 Sub-zone for which event applies to (0-255). 255 is all sub-zones.
3-7 Can be present or not be present. If present the bytes give additional user specific information.

Type=35 (0x23) - Memory error 

VSCP_TYPE_ERROR_MEMORY

This error message is used to indicate a memory error.

Data byte Description
0 index. Often used as an index for channels/sub devices within a module.
1 Zone for which event applies to (0-255). 255 is all zones.
2 Sub-zone for which event applies to (0-255). 255 is all sub-zones.
3-7 Can be present or not be present. If present the bytes give additional user specific information.

Type=36 (0x24) - Internal error 

VSCP_TYPE_ERROR_INTERNAL

This error message is used to indicate a internal error.

Data byte Description
0 index. Often used as an index for channels/sub devices within a module.
1 Zone for which event applies to (0-255). 255 is all zones.
2 Sub-zone for which event applies to (0-255). 255 is all sub-zones.
3-7 Can be present or not be present. If present the bytes give additional user specific information.

Type=37 (0x25) - Communication error 

VSCP_TYPE_ERROR_COMMUNICATION

This error message is used to indicate a communication error.

Data byte Description
0 index. Often used as an index for channels/sub devices within a module.
1 Zone for which event applies to (0-255). 255 is all zones.
2 Sub-zone for which event applies to (0-255). 255 is all sub-zones.
3-7 Can be present or not be present. If present the bytes give additional user specific information.

Type=38 (0x26) - User error 

VSCP_TYPE_ERROR_USER

This error message is used to indicate a user error.

Data byte Description
0 index. Often used as an index for channels/sub devices within a module.
1 Zone for which event applies to (0-255). 255 is all zones.
2 Sub-zone for which event applies to (0-255). 255 is all sub-zones.
3-7 Can be present or not be present. If present the bytes give additional user specific information.

Type=39 (0x27) - Password error 

VSCP_TYPE_ERROR_PASSWORD

This error message is used to indicate a password error.

Data byte Description
0 index. Often used as an index for channels/sub devices within a module.
1 Zone for which event applies to (0-255). 255 is all zones.
2 Sub-zone for which event applies to (0-255). 255 is all sub-zones.
3-7 Can be present or not be present. If present the bytes give additional user specific information.

Type=40 (0x28) - Connection error 

VSCP_TYPE_ERROR_CONNECTION

This error message is used to indicate a connection error.

Data byte Description
0 index. Often used as an index for channels/sub devices within a module.
1 Zone for which event applies to (0-255). 255 is all zones.
2 Sub-zone for which event applies to (0-255). 255 is all sub-zones.
3-7 Can be present or not be present. If present the bytes give additional user specific information.

Type=41 (0x29) - Invalid handle error 

VSCP_TYPE_ERROR_INVALID_HANDLE

This error message is used to indicate a invalid handle error.

Data byte Description
0 index. Often used as an index for channels/sub devices within a module.
1 Zone for which event applies to (0-255). 255 is all zones.
2 Sub-zone for which event applies to (0-255). 255 is all sub-zones.
3-7 Can be present or not be present. If present the bytes give additional user specific information.

Type=42 (0x2A) - Operation failed error 

VSCP_TYPE_ERROR_OPERATION_FAILED

This error message is used to indicate an operation failed error.

Data byte Description
0 index. Often used as an index for channels/sub devices within a module.
1 Zone for which event applies to (0-255). 255 is all zones.
2 Sub-zone for which event applies to (0-255). 255 is all sub-zones.
3-7 Can be present or not be present. If present the bytes give additional user specific information.

Type=43 (0x2B) - Supplied buffer is to small to fit content 

VSCP_TYPE_ERROR_BUFFER_SMALL

This error message is used to indicate that the supplied buffer is to small to fit content.

Data byte Description
0 index. Often used as an index for channels/sub devices within a module.
1 Zone for which event applies to (0-255). 255 is all zones.
2 Sub-zone for which event applies to (0-255). 255 is all sub-zones.
3-7 Can be present or not be present. If present the bytes give additional user specific information.

Type=44 (0x2C) - Requested item is unknown 

VSCP_TYPE_ERROR_ITEM_UNKNOWN

This error message is used to indicate that the requested item (remote variable) is unknown.

Data byte Description
0 index. Often used as an index for channels/sub devices within a module.
1 Zone for which event applies to (0-255). 255 is all zones.
2 Sub-zone for which event applies to (0-255). 255 is all sub-zones.
3-7 Can be present or not be present. If present the bytes give additional user specific information.

Type=45 (0x2D) - Name is already in use 

VSCP_TYPE_ERROR_NAME_USED

This error message is used to indicate that the name is already in use.

Data byte Description
0 index. Often used as an index for channels/sub devices within a module.
1 Zone for which event applies to (0-255). 255 is all zones.
2 Sub-zone for which event applies to (0-255). 255 is all sub-zones.
3-7 Can be present or not be present. If present the bytes give additional user specific information.

Type=46 (0x2E) - Error when writing data 

VSCP_TYPE_ERROR_DATA_WRITE

This error message is used to indicate an error when writing data.

Data byte Description
0 index. Often used as an index for channels/sub devices within a module.
1 Zone for which event applies to (0-255). 255 is all zones.
2 Sub-zone for which event applies to (0-255). 255 is all sub-zones.
3-7 Can be present or not be present. If present the bytes give additional user specific information.

Type=47 (0x2F) - Operation stopped or aborted 

VSCP_TYPE_ERROR_ABORTED

This error message is used to indicate a stopped or an aborted operation.

Data byte Description
0 index. Often used as an index for channels/sub devices within a module.
1 Zone for which event applies to (0-255). 255 is all zones.
2 Sub-zone for which event applies to (0-255). 255 is all sub-zones.
3-7 Can be present or not be present. If present the bytes give additional user specific information.

Type=48 (0x30) - Pointer with invalid value 

VSCP_TYPE_ERROR_INVALID_POINTER

This error message is used to indicate a pointer with an invalid value.

Data byte Description
0 index. Often used as an index for channels/sub devices within a module.
1 Zone for which event applies to (0-255). 255 is all zones.
2 Sub-zone for which event applies to (0-255). 255 is all sub-zones.
3-7 Can be present or not be present. If present the bytes give additional user specific information.

Very Simple Control Protocol
Wed Nov 28 2018 07:10:31 GMT+0000 (UTC)
This document is licensed under Creative Commons BY 4.0 and can be freely copied, redistributed, remixed, transformed, built upon as long as you give credits to the author.

results matching ""

    No results matching ""