Class=513 (0x0201) - Class2 Level I Alarm

CLASS2.LEVEL1.ALARM

Description

This class mirrors the CLASS1.ALARM class but use a different data format with a GUID stored in the first 16 bytes of the data followed by the standard data thus offset with 16-bytes.

See CLASS2.PROTOCOL1 for more information on the data format.

Type=0 (0x00) - General event

VSCP_TYPE_ALARM_GENERALGeneral Event. 

Type=1 (0x01) - Warning

VSCP_TYPE_ALARM_WARNINGIndicates a warning condition. 
Data byte Description
0 0=off. 1=on.
1 Zone for which event applies to (0-255). 255 is all zones.
2 Sub-zone for which event applies to (0-255). 255 is all sub-zones.

If both or one of zone/sub-zone are omitted they should be interpreted as if they where 255.


Type=2 (0x02) - Alarm occurred

VSCP_TYPE_ALARM_ALARMIndicates an alarm condition. 
Data byte Description
0 0=off. 1=on.
1 Zone for which event applies to (0-255). 255 is all zones.
2 Sub-zone for which event applies to (0-255). 255 is all sub-zones.

If both or one of zone/sub-zone are omitted they should be interpreted as if they where 255.


Type=3 (0x03) - Alarm sound on/off

VSCP_TYPE_ALARM_SOUNDAlarm sound should be turned on or off. 
Data byte Description
0 0=off. 1=on.
1 Zone for which event applies to (0-255). 255 is all zones.
2 Sub-zone for which event applies to (0-255). 255 is all sub-zones.

If both or one of zone/sub-zone are omitted they should be interpreted as if they where 255.


Type=4 (0x04) - Alarm light on/off

VSCP_TYPE_ALARM_LIGHTAlarm light should be turned on or off. 
Data byte Description
0 0=off. 1=on.
1 Zone for which event applies to (0-255). 255 is all zones.
2 Sub-zone for which event applies to (0-255). 255 is all sub-zones.

If both or one of zone/sub-zone are omitted they should be interpreted as if they where 255.


Type=5 (0x05) - Power on/off

VSCP_TYPE_ALARM_POWERPower has been lost or is available again. 
Data byte Description
0 0=off. 1=on.
1 Zone for which event applies to (0-255). 255 is all zones.
2 Sub-zone for which event applies to (0-255). 255 is all sub-zones.

If both or one of zone/sub-zone are omitted they should be interpreted as if they where 255.


Type=6 (0x06) - Emergency Stop

VSCP_TYPE_ALARM_EMERGENCY_STOPEmergency stop has been hit/activated. All systems on the zone/sub-zone should go to their inactive/safe state.
Data byte Description
0 0=off. 1=on.
1 Zone for which event applies to (0-255). 255 is all zones.
2 Sub-zone for which event applies to (0-255). 255 is all sub-zones.

If both or one of zone/sub-zone are omitted they should be interpreted as if they where 255.


Type=7 (0x07) - Emergency Pause

VSCP_TYPE_ALARM_EMERGENCY_PAUSEEmergency pause has been hit/activated. All systems on the zone/sub-zone should go to their inactive/safe state but preserve there settings. 
Data byte Description
0 0=off. 1=on.
1 Zone for which event applies to (0-255). 255 is all zones.
2 Sub-zone for which event applies to (0-255). 255 is all subzones.

If both or one of zone/sub-zone are omitted they should be interpreted as if they where 255.


Type=8 (0x08) - Emergency Reset

VSCP_TYPE_ALARM_EMERGENCY_RESETIssued after an emergency stop or pause in order for nodes to reset and start operating .
Data byte Description
0 0=off. 1=on.
1 Zone for which event applies to (0-255). 255 is all zones.
2 Sub-zone for which event applies to (0-255). 255 is all sub-zones.

If both or one of zone/sub-zone are omitted they should be interpreted as if they where 255.


Type=9 (0x09) - Emergency Resume

VSCP_TYPE_ALARM_EMERGENCY_RESUMEIssued after an emergency pause in order for nodes to start operating from where they left of without resetting their registers . 
Data byte Description
0 0=off. 1=on.
1 Zone for which event applies to (0-255). 255 is all zones.
2 Sub-zone for which event applies to (0-255). 255 is all sub-zones.

If both or one of zone/sub-zone are omitted they should be interpreted as if they where 255.


Type=10 (0x0A) - Arm

VSCP_TYPE_ALARM_ARMIssued after an alarm system has been armed. 
Data byte Description
0 0=off. 1=on.
1 Zone for which event applies to (0-255). 255 is all zones.
2 Sub-zone for which event applies to (0-255). 255 is all sub-zones.

If both or one of zone/sub-zone are omitted they should be interpreted as if they where 255.


Type=11 (0x0B) - Disarm

VSCP_TYPE_ALARM_DISARMIssued after an alarm system has been disarmed. 
Data byte Description
0 0=off. 1=on.
1 Zone for which event applies to (0-255). 255 is all zones.
2 Sub-zone for which event applies to (0-255). 255 is all sub-zones.

If both or one of zone/sub-zone are omitted they should be interpreted as if they where 255.



Very Simple Control Protocol
Thu Aug 16 2018 09:30:01 GMT+0000 (UTC)
This document is licensed under Creative Commons BY 4.0 and can be freely copied, redistributed, remixed, transformed, built upon as long as you give credits to the author.

results matching ""

    No results matching ""